Sunday, December 22, 2024

MODUtherm - Multizone

Modular Air Handling Units with EC fan motors.
Up to 19,000 Litres/Sec.


MODUtherm® fully integrates multiple technologies to minimise energy consumption and deliver reliable, trouble-free performance. Their modular design and construction reduces overall unit dimensions making them ideal for plant rooms with limited space. The high quality range features state-of-the-art high efficiency EC plug fans and the latest airtight casing construction.

MODUtherm’s innovative design incorporates EC fans that operate in parallel and are mounted adjacent to each other on an internal wall. The design provides inherent fan redundancy and will continue to operate even if there is a fault with one fan. The fans can be controlled by MODBUS or 0-10V signal and run independently or integrated into most building management systems.

The units are constructed with 50mm thick insulated panels that are fitted with the revolutionary AHU CLIP ‘n’ LOCK fastening system. This airtight system includes a synthetic cord and aluminium capping that give the unit a strong, rigid structure and allows the panels to be removed easily for maintenance and cleaning. AHU CLIP ‘n’ LOCK also provides a high thermal performance which reduces condensation and minimises energy loss. The high quality modular casing construction achieves both the highest degree of air tightness, rating “L1”, and the highest resistance to condensation, rating “TB1”, as defined in BS EN 1886:2007.

They are also available in Vertical or Horizontal configurations.

  • High quality double skin Colorbond 50mm polyurethane panel construction that complies with National Construction Code insulation specification J5.2
  • Panels have zero ozone depleting potential (0% ODP)
  • CLIP ‘n’ LOCK panels are easy to remove allowing access for maintenance and cleaning
  • High efficiency EC plug fans with integrated speed control, current overload and motor phase protection, reverse polarity, locked rotor protection and soft starting
  • EC plug fan motors exceed EU’s minimum level of efficiency for electric motors (IE4)
  • To minimise on-site installation time fan motors are pre-wired to a junction box
  • Chilled water cooling coils available with 3, 4, 5, 6, 8 or 10 rows and 315, 394 or 472 fins per metre
  • Hot water heating coils available with 1 or 2 rows and 315, 394 or 472 fins per metre
  • Combined maximum of 10 cooling and heating coil rows per unit
  • Cooling and heating coil separation with access door
  • Matching filter plenums are available
  • Upper and lower condensate tray manufactured from quality 304 grade stainless steel (316 grade stainlesssteel option also available)
Commercial applications including:
  • Shopping centres
  • Office buildings
  • Hotels
  • Health facilities
  • Schools and Universities

Units incorporate the unique CLIP ‘n’ LOCK system where the removable casing panels clip into a continuous aluminium locking strip with an EPDM closed cell foam underseal. The locking strip is secured into position with a continuous synthetic cord, forming an airtight seal. MODUtherm units include a modular, thermally broken aluminium frame construction with double skin, 50mm thick polyurethane-filled panels. The unit case has a TB1 thermal bridging and Class L1 leakage rating. Casing construction complies with National Construction Code insulation specification J5.2 (all areas except for alpine areas).

Each unit is complete with a lift-off access panel on the coil pipe side allowing for inspection and cleaning. Access to the fan section and filter plenum is by hinged door. The upper and lower condensate trays are of a non-ponding design manufactured from grade 304 stainless steel.

Units incorporate multiple, high efficiency EC plug type fans operating in parallel and mounted adjacent to each other on an internal wall. The number of fans varies depending on the model.

  • EC motors are 3 phase 415V 50-60Hz
  • Bearings are sealed for life ball type
  • Integrated EC controller provides infinite speed control
  • IP54-rated

The Air Handling Units shall be of the MODUtherm® series as designed by Fantech and be of the model numbers as shown on the schedule/drawing.

Units shall incorporate modular, thermally broken, aluminium frame construction with double skin, 50mm thick, polyurethane-filled panels achieving TB1 thermal bridging rating as defined in BS EN 1886:2007. Casing shall be leakage tested to BS EN 1886, Class L1 at 100Pa positive pressure. Panels shall also comply with the National Construction Code insulation specification J5.2 and have zero ozone depleting potential (0 % ODP).

Unit casings shall incorporate CLIP ‘n’ LOCK removable panels that are sealed airtight by the use of a continuous EPDM closed cell foam underseal and a continuous clip in aluminium locking strip. The panels are locked into the strip with a continuous synthetic cord. The panels shall be removable without the need for screws or fasteners to allow access for maintenance. Cooling and heating capacities and external static pressures shall be as shown on the schedule.

Units shall incorporate multiple EC plug fans operating in parallel with motors exceeding EU’s minimum efficiency level (IE4) and complying with IP54 protection. Fans shall be pre-wired to an external terminal box.

Models *

Model Number
 
Air Flow
Litres/sec
 
Static
Pressure
(External) Pa
Cooling
Capacity
(Total) kW
Cooling
Capacity
(Sensible) kW
Heating
Capacity
(Total) kW
Motor
Power
kW
Full Load
Current
Amps
Drawing
PDF

MODU0202MZ 597 450 17.30 11.40 11.80 0.80 x 1 3.70 x 1 MODU0202MZ
MODU0203MZ 984 450 30.50 19.70 21.10 2.50 x 1 3.80 x 1 MODU0203MZ
MODU0204MZ 1372 450 32.70 30.30 30.30 2.50 x 1 3.80 x 1 MODU0204MZ
MODU0303MZ 1600 450 36.20 34.30 24.80 2.50 x 1 3.80 x 1 MODU0303MZ
MODU0205MZ 1759 450 53.60 34.90 39.40 2.40 x 1 3.70 x 1 MODU0205MZ
MODU0304MZ 2230 450 68.70 44.50 49.20 5.40 x 1 8.20 x 1 MODU0304MZ
MODU0305MZ 2860 450 87.20 56.70 60.30 5.40 x 1 8.20 x 1 MODU0305MZ
MODU0404MZ 3086 450 95.00 61.60 68.10 5.00 x 1 7.70 x 1 MODU0404MZ
MODU0306MZ 3490 450 104.20 68.20 74.70 5.00 x 1 7.70 x 1 MODU0306MZ
MODU0405MZ 3958 450 120.60 78.40 88.60 5.40 x 2 8.20 x 2 MODU0405MZ
MODU0307MZ 4116 450 125.40 81.60 90.80 5.40 x 2 8.20 x 2 MODU0307MZ
MODU0406MZ 4829 450 151.70 97.70 103.40 5.40 x 2 8.20 x 2 MODU0406MZ
MODU0505MZ 4841 450 147.50 95.90 102.10 5.40 x 3 8.20 x 3 MODU0505MZ
MODU0407MZ 5701 450 137.70 113.00 125.80 5.00 x 2 7.60 x 2 MODU0407MZ
MODU0506MZ 5907 450 176.30 115.40 126.50 5.00 x 2 7.60 x 2 MODU0506MZ
MODU0408MZ 6572 450 203.40 131.60 145.00 5.00 x 2 7.60 x 2 MODU0408MZ
MODU0507MZ 6973 450 208.10 136.20 149.30 5.40 x 3 8.20 x 3 MODU0507MZ
MODU0606MZ 6980 450 208.30 136.40 149.50 5.40 x 3 8.20 x 3 MODU0606MZ
MODU0508MZ 8039 450 248.80 161.00 177.40 5.40 x 4 8.20 x 4 MODU0508MZ
MODU0607MZ 8239 450 251.10 163.30 181.80 5.00 x 3 7.60 x 3 MODU0607MZ
MODU0509MZ 9140 450 274.60 179.20 203.80 5.00 x 3 7.60 x 3 MODU0509MZ
MODU0608MZ 9499 450 294.00 190.20 209.60 5.00 x 3 7.60 x 3 MODU0608MZ
MODU0707MZ 9815 450 299.10 194.50 216.60 5.00 x 4 7.60 x 4 MODU0707MZ
MODU0609MZ 10759 450 324.50 211.80 240.90 5.00 x 4 7.60 x 4 MODU0609MZ
MODU0708MZ 11316 450 339.50 221.90 249.70 5.00 x 2 7.60 x 2 MODU0708MZ
MODU0610MZ 12018 450 370.00 239.90 273.00 5.00 x 4 7.60 x 4 MODU0610MZ
MODU0709MZ 12817 450 386.60 252.30 287.00 5.00 x 4 7.60 x 4 MODU0709MZ
MODU0710MZ 14317 450 395.80 266.20 325.20 5.00 x 5 7.60 x 5 MODU0710MZ
MODU0711MZ 15818 450 447.30 298.30 359.30 5.00 x 6 7.60 x 6 MODU0711MZ
MODU0712MZ 17318 450 497.80 330.20 393.40 5.00 x 6 7.60 x 6 MODU0712MZ
MODU0713MZ 18819 450 543.90 360.00 433.60 5.00 x 6 7.60 x 6 MODU0713MZ

*Air flow and coil performance are at 2.5m/s coil face velocity.
Cooling capacities are based on 8 row 472fin/m coils with entering air conditions of 26/19°C and water temperatures of 6/12 °C.
Heating capacities are based on 1 row 394fin/m coils with entering air at 12oC and water temperatures of 80/65 °C.
Absorbed power, motor power and current (per fan x no of fans).
Back to Home